ALCATEL-LUCENT
OMNIACCESS 130 SERIES ACCESS POINTS
DUAL RADIO 802.11N 3X3:3 ACCESS POINTS
Look Ma... No Wires!
The multifunctional 130 series wireless access points (APs) maximize mobile device performance in extremely high density Wi-Fi environments and ensure strong threat protection using integrated MACSec security.
These ultra-high-performance 802.11n APs deliver wireless data rates up to 450 Mbps per radio and employ three spatial streams to support 50% more throughput and mobile devices than previous generation APs.
MACSec authentication and encryption on Ethernet ports enable secure AP deployment by interoperating with the MACSec capability on Alcatel-Lucent Mobility Access Switches and other wiring closet equipment.
The 135 series of APs features two dual-band 2.4-GHz and 5-GHz radios with 3×3 MIMO and four integrated omni-directional downtilt antennas. The 134 series features the same radios with external antenna connectors.
BEST-IN-CLASS RF MANAGEMENT
All Alcatel-Lucent APs include Adaptive Radio Management™ technology, which is essential to creating the most reliable, highperformance WLANs. ARM™ manages the 2.4-GHz and 5-GHz radio bands to optimize Wi-Fi client performance and ensures that APs stay clear of RF interference.
The 130 series can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.
CHOOSE YOUR OPERATING MODE
The 130 series offers a choice of operating modes to meet your unique management and deployment requirements.
• Controller-managed mode: When managed by Alcatel-Lucent Mobility Controllers, 130 series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding. Please refer to the Alcatel- Lucent Mobility Controller data sheets for more details.
• Alcatel-Lucent Instant™ mode: In Alcatel-Lucent Instant mode, a single AP is dynamically elected the Virtual Controller, which automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one Instant AP,
configure it over the air, and plug in the other APs – the entire process takes about five minutes.
For large installations, the Alcatel-Lucent Product Activation Service dramatically reduces deployment time by automating Alcatel-Lucent Instant provisioning, firmware upgrades and inventory management. APs are factory-shipped to your deployment site and configure themselves when powered up.
If WLAN and network requirements change, a built-in migration path allows 130 series Instant APs to become part of a WLAN that is centrally managed by a Mobility Controller.
ALCATEL-LUCENT OMNIACCESS
110 SERIES ACCESS POINTS
OPTIMIZE CLIENT PERFORMANCE IN HIGH-DENSITY WI-FI ENVIRONMENTS
The multifunctional and affordable Alcatel-Lucent OmniAccess™ 110 series wireless access points (APs) maximize mobile device performance in high density Wi-Fi® environments while minimizing interference from Long Term Evolution (LTE) cellular networks.
These high-performance 802.11n APs deliver wireless data rates up to 450 Mb/s per radio and employ three spatial streams to support 50 percent more throughput and mobile devices than previous generation APs.
The AP115 and IAP115 APs feature a 2.4- GHz and a 5-GHz radio, each with 3×3:3 multiple-input multiple-output (MIMO), and three integrated omnidirectional downtilt antennas. The AP114 and IAP114 models feature the same radios with three combined and diplexed external antenna connectors.
FEATURES
Advanced Cellular Coexistence (ACC)
The 110 series ACC feature minimizes interference from 3G/4G LTE networks, distributed antenna systems and commercial small cell/femto cell equipment.
ClientMatch
While users roam, ClientMatch™ eliminates the sticky client behavior by continuously gathering the session performance metrics from mobile devices. If a mobile device moves out of range of an AP, or if radio frequency (RF) interference impedes
performance, ClientMatch automatically steers the device to a better AP.
Adaptive Radio Management (ARM)
ARM manages the 2.4-GHz and 5-GHz radio bands to optimize Wi-Fi client performance and to ensure that APs stay clear of RF interference. ARM also provides the best-in-class RF management, which is essential to creating the most reliable, high performance wireless LANs (WLANs).
BENEFITS
• The 110 series ACC feature enables Alcatel-Lucent WLANs to perform at peak efficiency by minimizing interference with 3G/4G networks.
• Wi-Fi client performance and the WLAN network performance are optimized by eliminating sticky client behavior.
The 110 series can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, virtual private network (VPN) tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.
